E-10
8. Operating Procedure
8-1. User Setup
This dome camera is provided with user setup function for picture quality,
sync system selection and camera ID, P.Mask setting etc. The setup menu is
a tree type on-screen-display.
To make a camera setup procedure, connect the Setup Adapter as shown.
8-2. Names and functions of the setup adapter
The supplied setup adapter shown has four switches
and indications.
This setup adapter is used with setup unit connector
onto the camera unit.
(Refer to Drawing No.8-1)
Up switch (U)
To select setup parameters
Down switch (D)
Right switch (R)
To change setup
Left switch (L)
parameters
Enter switch (E)
To get in or get out to
setup mode, and to enter
and execute procedures.
* To get into Setup mode, hold E button more than 2 seconds.
L
R
D
U
E
L
R
D
U
E
Setup Adapter
