Ikegami FA-55, Operation Manual

Page: 104 / 160

88
i
Menu Item
Initial
Setting
Setting Value Description, Remarks
MENU DATA
ALL VF
―
HI-LIGHT DTL OFF ON, OFF Possible to increase the DTL level of the highlight part.
× ×
―
GAIN 0.0 0 to 100
6HWVWKHOHYHOYDOXHWREHHPSKDVL]HG
/HYHOLQFUHDVHVLQWKHGLUHFWLRQRI
× ×
LIMIT 0.0 WR
6HWVWKHXSSHUOLPLWIRUWKHHPSKDVL]HG'7'OHYHO
7KHGLUHFWLRQORZHUVWKHOLPLW7KHGLUHFWLRQ
raises the limit and lowers the DTL level.
× ×
―
SMOOTH KNEE
7<3(
7<3(7<3(7<3(
OFF
SMOOTH KNEE is a function to adjust the compression
level of the brightness signal with KNEE. It can be selected
from the following three setting types.
7<3( 7KHFRPSUHVVLRQUDWHRIEULJKWQHVVLVORZ
7<3( 7KHFRPSUHVVLRQUDWHRIEULJKWQHVVLVPHGLXP
7<3( 7KHFRPSUHVVLRQUDWHRIEULJKWQHVVLVKLJK
× ×
―
DTL V FILTER OFF ON, OFF
If the V filter of the DTL is ON, the resolution in direction V
diminishes, making it possible to obtain an image with less
noise.
○ ×
NR MODE OFF 2))/2:+,*+ Set of NR
○ ×
CUSTOM GAMMA DATA
―
EASY MODE
Simple creation mode. Sets the various parameters and create
custom gamma data.
―
DEFAULT RESET --- (;(&87(&$1&(/
Restore the custom gamma data you created.
If you previously saved the custom gamma data with
6$9(
\RXZLOOUHWXUQWRWKHVDYHGGDWD$IWHUVDYLQJZLWK6$9(
you can not restore the data before saving.
- -
―
SELECT 1250$/
1250$/&86720WR
5
Choose the gamma table to be created.
- -
―
CURVE TYPE ---
1250$//2*
63(&,$/
Sets the basic characteristics of the gamma curve.
- -
―
INITIAL GAIN --- 1.0 to 9.0
Sets the inclination of the gamma curve around 0%.
The larger the value, the sharper the gamma curve rises.
- -
―
18% GRAY --- 14.0% to 107.0%
Sets 18% at the level before gamma to what level to convert
after gamma.
- -
―
DYNAMIC RANGE --- 100% to 600%
Sets the maximum level before gamma (maximum value of
input level to gamma).
- -
―
WHITE LIMIT --- 70% to 109% Sets the white clip of data after gamma.
- -
―
CAL OFF
2))&$/
&$/&$/
&$/&$/
&KRRVHWKHWHVWZDYHIRUP&$/IRUFKHFNLQJWKHJDPPD
table.
- -
SAVE --- (;(&87(&$1&(/
Saves the created data.Before saving, it is made with
SURYLVLRQDOGDWD,I\RXH[LWWKHPHQXZLWKRXW6$9(WKH
created data will be cleared.
- -
―
SHUTTER OFF
OFF, PRESET,
9$5,$%/(
Selects the electronic shutter.
- -
―
SHUTTER SPEED
1/100
35(6(7WR
9$5,$%/(WR
Changes the shutter speed.(Only when SHUTTER is
35(6(7DQG9$5,$%/(
- -
―
GAMMA CURVE COPY
CUSTOM 1 to 5
> CUSTOM 1 to 5
Copies the created custom gamma data to other data in the
camera.
- -
―
SD MEMORY CARD
―
SAVE
Saves the custom gamma data to SD card.
LOAD Reads the custom gamma data from the SD card.
PRESET FILE LOAD
)XQFWLRQWRORDGWKHXVHUVHWWLQJV(1*,1((56(7),/(
RUIDFWRU\VHWWLQJV)$&725<6(7),/(IRUWKHOHYHO
adjustment or menu of the camera.
Used to return the camera state back to the previous or initial
settings.
―
FILE SELECT (1*,1((5 (1*,1((5)$&725<
(1*,1((5 ,QLWLDOL]HVWKHVWDWHEDFNWRWKHXVHUVHWWLQJ
)$&725< ,QLWLDOL]HVWKHVWDWHEDFNWRWKHLQLWLDOIDFWRU\
setting.
× ×
LOAD START 5($'<
5($'<67$57
&$1&(/
([HFXWHVLQLWLDOL]DWLRQ
- -
:KHQFRPSLOLQJ$%%$:%UHIHUHQFHILOHVIURPWKHPHQX1RRI6RIWKH038PRGXOHPXVWEHWXUQHG21
When changing the switch, be sure to first turn the power OFF.
$IWHUFRPSLOLQJWKHUHIHUHQFHILOHEHVXUHWRUHWXUQ1RRI6WR2))
When compiling the reference file from the control panel, it is not necessary to turn this switch ON.