Ikegami FA-55, Operation Manual

Page: 10 / 160

vi
HDK-73 1707 VER1 (E)
S FET PREC UTIONS
Regarding the Product
Be sure to hold the plug and pull when you disconnect the cable.
)DLOXUHWRGRVRPD\FDXVHD¿UHRUHOHFWULFVKRFNGXHWRDEURNHQFDEOH
$YRLGPRYLQJWKHHTXLSPHQWVXGGHQO\IURPDQH[WUHPHO\FROGSODFHWRDZDUPSODFH
Condensation may occur in the CMOS image sensor or other parts.
Do not drop or insert a metal object such as a pin or a foreign object into the equipment.
Do not spread or spill water or other liquid on the equipment.
Do not subject the equipment to a strong shock or vibration.
Doing so may cause damage or malfunction of the equipment.
Since semiconductor pixels are adapted in CMOS image sensor, image burn-in will not occur in
normal operation. When you shoot subjects with an excessive amount of light (e.g. sun, laser beam,
etc.) for a long time, pay attention to temperature rise inside the CMOS sensor.
Before connecting a VTR or accessories, make sure that the camera and equipment to be connected
DUHSRZHUHGRII$OVREHVXUHWRXVHGHGLFDWHGFDEOHV
Laser beams may damage the CMOS image sensors. If you shoot a scene that includes a laser
beam, be careful not to let a laser beam become directed into the lens of the camera.
Excessive sound pressure from the headset may cause a hearing loss.
Regarding the Power and the Lithium Battery
Use the product in compliance with the rating of the fuse within the product and that within the
Camera Control Unit (BS). Otherwise, a fault can occur.
'RQRWXVHDQXQVSHFL¿HGEDWWHU\
:URQJXVDJHRIEDWWHULHVPD\FDXVHOLTXLGOHDNH[SORVLRQDQGKHDWDQGDWZRUVWLQMXU\RU¿UH
When changing or discarding a battery, please contact Ikegami's sales and service centers.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
the instructions.
Regarding the Fiber Connector and the Fiber Optic Cable
)LEHURSWLFFDEOHFRQQHFWRUVDUHTXLWHVLPLODUWRHDFKRWKHULQVKDSH%HIRUHFRQQHFWLQJ¿EHURSWLF
cables, thoroughly check male or female, the diameter, type and manufacturer of connectors.
If the ferrule is dirty, wipe the dirt off with cotton swabs soaked in alcohol.
7KH¿EHURSWLFFDEOHVXSSOLHV'&9SRZHUIURPWKH%6WRWKHFDPHUD
$OWKRXJKVDIHW\PHDVXUHVDUHIXOO\WDNHQVXFKDVWKHVDIHW\FLUFXLWWKDWVWRSVWKHSRZHUVXSSO\
IURPWKH%6ZLWKLQDVKRUWWLPHDIWHUDQRSWLFDO¿EHUFDEOHLVUHPRYHGRUVKRUWFLUFXLWHGQHYHU
force to bend, twist, or damage the cable, and take great care when handling.