Tie rod M2x52 mm
Ballend, large
M2x8 mm LH Screw
Ball
M2 mm Nut
Tie rod M2x72 mm
Ballend, long
M2x8 mm LH Screw
Ball
M2 mm Nut
17 mm
2x
4x
2x
2x
2x
67533
67565
67603
67576
67582
67582
12 mm
67576
67603
17 mm
17 mm
1x
2x
1x
1x
1x
67531
67565
67603
67576
67582
67582
12 mm
67576
67603
77 mm
67565
67531
67565
View from the front.
The rods length may vary
according to the servo used.
In neutral position the
swashplate should be 17 mm
above the upper bearing
plate.
abt.
77 mm
67565
67531
67565
Shorten the 72 mm rod
down to 52 mm.
View from the top.
Make sure that both rods have the same length and the
swashplate is exactly parallel to the upper bearing plate.
Possible difficulties may arise from the servo mounting.
Therefore please make sure that you mount both servos in the
same way. Either you centralise them in the main frame or they
may rest against the upper or lower bracket.
The more straight the rods are the better steering response you
will obtain.
View from the top.
Make sure that the rod has the same length and the
swashplate is exactly parallel to the upper bearing plate.
Possible difficulties may arise from the servo mounting.
Therefore please make sure that you mount the servos in
the same way. Either you centralise them in the main
frame or they may rest against the upper or lower
bracket. The more straight the rods are the better
steering response you will obtain.
