Gear meshing is a rather sensitive subject.
Wrong adjustments cause high friction and
unnecessary wear and tear whereas the
correct adjustment is very simple.
Loosen the motor screws.
Put an unused part bag between pinion and
main gear.
Move the motor with the pinion against the
main gear and tighten the screws.
Remove the plastic bag.
Adjust the meshing in the same way at the
taildrive gear.
*)
Please keep in mind:
You have to use different pinions
regarding the used motor or the
number of used battery cells. (See
page
28
and
the
following
ones).Follow
the
operating
instructions of the motor and keep
close to the described features of the
Bottom view
Plastic Bag
1x
2x
2x
1x
1x
70103
67605
67631
67608
67574
Motor (not included in
Kit No.: 67900)
M3x8 mm CH Screw
Washer 3 mm
Pinion 10 T
M3x4 mm set screw
