Commissioning
29
28 Commissioning
Setting speed
› Ensure the speed set is suitable for the test medium selected. If in doubt,
set the speed to the lowest speed (counterclockwise direction) by rotating
the control knob
(G)
. Press the control knob
(G)
to start or stop the stirring.
Setting the vibration monitoring
› By touching the vibration monitoring key
(C)
you can switch the sensitivity
fuction on/off and set the levels
I, II
or
III
.
Setting the counter
› As soon as the stirring function starts, the counter function
is automatically activated.
/// Setting the timer (hh:mm:ss)
The counter is deactivated.
Procedure:
1.
Select the Counter / Timer key
(F).
2.
Select timer key
(D)
and edit timer:
› Turn control knob
(G)
: Setting the value.
› Pressing the
control knob
(G)
: Confirms the
set value and switches to the next value (hh:mm:ss).
Locking the keys and knob
By touching the lock key
(B)
about 2 seconds, you can lock the control elements
of the device. Thus, no accidental changes are possible during operation.
By touching the lock key
(B)
about 2 seconds again, the control elements are
unlocked.
When the keys and rotary knob are locked by touching the
lock / unlock key (B), you can still switch off the device by
touching the standby key (A). After restarting the device,
the lock function is disabled.
Torque reset to zero
Keys combination during operation:
› Touch and hold the timer key
(D)
.
› Pressing the control knob
(G)
resets the current torque to 0 Ncm.
Summary of Contents for MICROSTAR 15 control
Page 1: ...MICROSTAR control...
