26 Securing
/// Assembling the stirring shaft protector
Stirrer
Screw
R 300
/// Securing the mixing vessel to the stand
Clamping bolt
Stand
Vessel
Clamping band
Strap clamp
Commissioning
27
Commissioning
/// Switching on
Secure the device to a stable stand with a cross sleeve.
The stirring vessel must always be securely fixed for safety reasons. You must
also ensure that the mounting device (stand) is set up in such a way that it is
not liable to topple and does not start to move during the stirring procedure.
If these conditions have been met, the machine is ready for operation when
the mains plug is plugged in. If these conditions are not met, safe operation is
not guaranteed and the machine could be damaged.
Observe the ambient conditions (temperature, humidity, etc.) listed under
“Technical Data”.
The AC adapter is suitable for 100 VAC to 240 VAC.
The exchangeable adapter for the relevant country must be attached before
the AC adapter is plugged into the mains socket.
Switching on
1.
After connecting the power to the device and touching the Standby key
(A)
,
the device is switched on. Following screens appear during self test:
2.
After that, the following screen appears auntomacally.
3.
Then, the device enters standby status and is ready for operation.
Nominal torque
Software version
Summary of Contents for MICROSTAR 15 control
Page 1: ...MICROSTAR control...
