IKA 06-5819, Operating Instructions Manual

Page: 30 / 48

IKA
®
-WERKE
28
7.2 The mixing tool
The high speed mixing tool and especially the fine toothed dispersion level is sensi-
tive to foreign objects. Therefore absolutely avoid allowing objects such as, screws,
stones and welding beads etc. to enter the machine. Be especially careful to avoid
this when adding mixing components.
For very sticky and hardening materials flush immediately after finishing.
Depending upon the abrasiveness of the mix product the mixing tools are subject to
a certain degree of wear. Since the size of the shear slot, especially for the disper-
sion level, has an influence on the mixed material the tools should be checked for
wear from time to time.
7.3 Barrier system
•
Daily check of the pressure gauge and the liquid level.
•
Occasional check of the flexible hose lines on their tightness, particularly in the
area of the screwed pipe connections.