IKA 06-5819, Operating Instructions Manual

Page: 25 / 48

IKA
®
-WERKE
23
4.4 Power supply
Info
The device connection must comply with VDE stan-
dards. Ensure that the motor voltage for the motor con-
nection and the mains voltage are identical. The motor
voltage is indicated on the motor rating plate or in the
technical data sheet.
Danger
•
Repair work on the machine's electrical equipment
may only be carried out by qualified electricians.
•
Check electrical equipment on a regular basis.
•
Secure loose connections.
•
Replace damaged lines/cables immediately.
•
Always keep the switching cabinet closed. Access is
only permitted to authorised personnel with the ap-
propriate keys/tools.
•
Never clean switching cabinets or other electrical
equipment enclosures by spraying with a water pipe.
∆
connection Y connection
figure 2
The connections shown in the figure above are the usual standard connections.
Please compare these with those in the terminal box on the motor. Since there are
also special motors, the wiring diagram in the terminal box on the motor is always the
valid one.