IKA 0005020000, Operating Instructions Manual

Page: 30 / 136

30
Languages:
The “
Languages “ option allows the user to select the desired lan-
guage by turning and pressing the rotary/push knob ( D ). A tick
indicates the language that is set for the system.
Units:
The ”
Units “ option allows the user to select the desired unit for
displaying the temperature. The choice is between ” °C ” or ” °F ”
and is made by turning and pressing the rotary/push knob ( D ). A
tick indicates the unit that is set for the system.
Display:
The ”
Display “ option allows the user to change the background
color between ”Black“ and ”White“, and display ”Firmware Update
Information“. A tick shows that the option is activated.
Sound:
The ”
Sound ” option allows the user to activate/deactivate the key
tone. A tick shows that the option is activated.
Factory Settings:
Select the ”
Factory Settings ” option by turning and pressing the
rotary/push knob. The system requests confirmation to restore the
factory settings. Pressing the ”OK” button resets all the system
settings to the original standard values set at dispatch from the
factory (see “Menu structure“).
Communication:
Bluetooth
The ” Bluetooth ” option allows the user to activate/deactivate the
” Bluetooth ” function. A tick shows that the option is activated.
Settings
The device allows the user to establish a connection to a wireless
controller box.
The device can then be operated via a wireless controller box
within a range of 10 m (without obstructions).
Please refer to the separate instruction manual for the wireless
controller box for more details.
Eurostar control
The new safety feature of the RET monitors the behavior of a
connected Eurostar and stops the heating process when the
Eurostar stirring speed falls below a specific minimum speed. The
RET also stops the heating process whenever the Eurostar is in
an error state or the cable connection between the RET and the
Eurostar gets lost.
The Eurostar can be connected with the RET control either via
RS232 or USB. The used interface has to be selected in the menu.
Main Menu  Settings  Communication  Eurostar control
Important information when the USB interface is used for the
communication between the RET and the Eurostar:
The USB cable has always be connected with the RET first and then
with the Eurostar.
For the stirrer speed of the Eurostar has to be a minimum speed
set. When the actual value of the stirrer speed falls below the
minimum limit the heating function of the RET will be stopped and
the RET will be set in an error state.
The new menus are only in English.
Information:
The ”
Information ” option offers the user an overview of the most
important system settings of the stirrer RET control-visc.
Connections and interfaces
Micro-USB
Bluetooth
Power supply connection
PT 100 / PT 1000 plug
RS 232
BNC connector (only for pH probe)
Pt1000-2
5
3 1
4
2
Pt1000-1
Pt100
5
3
1
4
2
9-pin connector