22
Unpacking
• Unpacking
- Unpack the device carefully
- Any damage should be notified immediately to the shipping
agent (post office, railway network or transport company)
• Scope of delivery
- RET control-visc heated magnetic stirrer
- Power supply cable
- Operating instructions
- Screwdriver (safety circuit)
- USB cable
Intended use
Assembling the support rod
Note:
When using bath attachments with a diameter over 180 mm, use
support rod in conjunction with an
extension (see “Accessories”).
• Use
- The magnetic stirrer is suitable for mixing and / or heating
substances.
• Area of use
Indoor environments similar to that a laboratory of research,
teaching, trade or industry area.
The safety of the user cannot be guaranteed:
- if the device is operated with accessories that are not supplied
or recommended by the manufacturer,
- if the device is operated improperly or contrary to the
manufacture’s specifications,
- if the device or the printed circuit board are modified by third
parties.
- Protective cover:
H 104
- Magnetic stirring bar:
IKAFLON
30
and
40
mm
- Temperature sensor:
PT 100.70
- O Ring
Please slide the O-Ring on the power cord plug to avoid ingress of
water into the connector.
O-Ring
Risk of tipping!
Make sure that the center of mass
of the attached device does not
protrude over the safe area indicat-
ed below with a dotted rectangle.
safe area
DANGER
1.
2.
3.
17 mm
• Review the mounting and safety instructions of the IKA boss
head clamp prior to using it. (see “Accessories”)
• The device must not be suspended from the support rod!
1.
2.
3.
4.
1.
2.
3.
4.
Summary of Contents for 0005020000
Page 135: ......
