English
18
7.3 Pushbuttons
iRig Pads also includes three programmable pushbuttons.
7.3.1 “1” and “2” pushbuttons
These buttons can be programmed similarly to the pads: send MIDI Notes, MIDI CH, PCs or MIDI CCs. The only
difference is that they cannot sense velocity.
7.3.2 “PUSH” encoder pushbutton
The rotary encoder knob can be pushed to send MIDI Notes, PCs, MICI CH or CCs. Its functionality is similar to
pushbuttons “1” and “2”.
The only difference between the rotary encoder and pushbottons “1” and “2” is that the encoder knob doesn’t
have any backlight.
7.4 External Pedal
iRig Pads has an external pedal input that works with both sustain and expression pedals.
The external pedal can be programmed to send CCs, PCs, Notes and MIDI CH.
8 Scene Editing
8.1 SCENE Button
This button lets you load and save scenes. A Scene is a “total recall” snapshot of the entire unit configuration.
NOTE: If no scene has been loaded or a change has been made to the loaded scene, the SCENE button
will flash slowly.
8.2 Scene Recall
To recall a scene:
• Press SCENE, the SCENE LED will illuminate steady.
• All pads containing a scene will illuminate GREEN.
• The pad with the in-use scene is illuminated ORANGE.
• Press the pad # relative to the scene you want to recall.
• The pad that has been pressed will quickly flash two times to confirm the scene has been loaded.
• iRig Pads will automatically exit the SCENE mode (SCENE button will go off).
NOTE: Tapping on a empty scene (non-illuminated pads) will not produce any effects and no scene will
be recalled.