English
29
• If ROT is selected the display will show ABS and can cycle between ABS (ABSOLUTE) and REL (relative).
Select one of the two modes by pressing the DATA push-knob;
• The display will show NBR (number) to let you insert the CC number. Insert the CC number (from 0 to 127)
with the keys marked from 0 to 9. You can cancel your input with the CANCEL/NO key
• To confirm your input press the DATA push-knob;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key.
5.3.2 Knob edit
You can assign a specific CC number to the knobs (1 to 8):
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the the DATA knob clockwise to reach the KNB position;
• Reached the KNB position press the DATA push-knob to confirm you want to edit the knob parameters;
• The display will show 1 to indicate that the selected knob is the number 1. By rotating the DATA knob you
can chose which knob to edit from 1 to 8. Knobs 5 to 8 will be active once the ALT button is ON.
• Reached the desired knob number press the DATA push-knob to confirm you want to edit that knob;
• The display will show ROT (rotative) to assign a CC to the rotation of the knob; or TCH (touch) to assign
a CC to the touch of the knob (this will work only if the Touch feature is active in the Global menu: refer to
point 3.1.4 of this manual);
• Select the mode you want to assign by pressing the DATA knob;
• If you have selected ROT the display will show ABS and can cycle between ABS (ABSOLUTE) and REL
(relative). Select one of the two modes by pressing the DATA push-knob;
• The display will show NBR (number) to let you insert the CC number you want to assign to the knob;
• Insert the MIDI control change number (from 0 to 127) with the keys marked from 0 to 9. You can cancel
