English
28
5.3 Preset edit menu
5.3.1 DATA Knob
You can assign to the DATA push-knob different behaviour (Relative or Absolute), Control Change messages or
audio volume control.
When working in Absolute (ABS) mode the knob will send values from 0 to 127 on the selected CC (+1
increments per clockwise knob steps and -1 decrements per counter-clockwise knob steps).
Once values 0 or 127 are reached they will be continued to be sent if the knob is rotated in the same direction.
The starting value from which to send +1 or -1 values will always be the last one sent by the knob the last time it
was moved.
When working in Relative (REL) mode the knob will send custom values to the selected CC. This will allow the
host application to browse long lists of elements easily.
5.3.1.1 Edit the DATA knob
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Press the DATA push-knob to confirm you want to edit the DATA knob
parameters;
• The display will show 1 and will cycle between 1 and 2 by rotating the DATA knob. This allows you to edit
the DATA knob message when the ALT button is active (2) or not active (1);
• Select the mode by press the DATA push knob to confirm the action;
• The display will show VOL and will cycle between VOL and CC by rotating the DATA knob;
• If you want to use the DATA knob (primary or alternative function) to act as the audio output volume select
VOL, otherwise select CC if you want to assign a generic control change message to the DATA knob.
• If VOL is selected the keyboard will exit the EDIT mode.
• If CC is selected the display will show ROT and will cycle between ROT (rotary) and PSH (push);
• Select ROT if you want to assign a generic CC message to the rotation of the knob; Select PSH if you want
to assign a generic CC message to the push of the knob;
