User Guide - Release 3.1 ENG 03/2020
iJet2L Srl
[email protected] | www.iJet2L.com
Company Confidential
Page 5
Warnings
Place the printer on a stable, vibration-free surface
Before connecting the power cable, check the compatibility between the mains voltage and that of the
power supply indicated on the label on the bottom of the power supply.
Never handle the power cord with wet hands
Make sure the power cord is fully inserted into the wall outlet
During the disconnection of the power cable, hold it by its end without pulling it.
Pulling on the cord may cause it to break
The socket must be installed near the equipment and be easily accessible.
Breva is configured to use only the inks distributed by iJet2L. Operation with cartridges that do not have the
iJet2L label is not guaranteed.
For optimal system performance, in anticipation of long periods of inactivity (e.g. holidays
summer or Christmas), it is recommended to remove the cartridges and close them with a special head
protector and store them in a cool and dry place.
Breva is built according to the technical safety standards recognized today. The Breva must be used
according to the provisions of this user manual. Any type of modification on one's own, which is outside the
maintenance operations indicated in this manual, is prohibited. Any other type of intervention not
mentioned in this user manual must be carried out by iJet2L qualified personnel
In case of transfer of the printer it is necessary to proceed as follows:
- Turn off the printer
- disconnect the printer from the power supply and the USB cable from the PC
- reuse the original packaging for the transfer, specially designed to avoid damage during transport.
Some inks may contain irritating substances for the skin, eyes and respiratory tract. If the fluid comes into
direct contact with the skin, follow the instructions on the cartridge shell.