User Guide - Release 3.1 ENG 03/2020
iJet2L Srl
[email protected] | www.iJet2L.com
Company Confidential
Page 33
Breva Control Center
–
Settings Menu
–
Item Tab
Settings
-
Item Height: correspond to the height of the object on which you want to print.
-
Jig Height: correspond to the height of any template used for positioning the object
-
Offset: in cases where it is necessary to move the print for the image to be printed centered on the
object, the values set in Centering from the left move the image on the X axis (left/right) and
Centering the top on the Y axis (low/high).
NB:
In the calculation, the driver adds the height of the Object and that of the Support (Template), so if you do
not know the individual heights, but only the global one, simply write it as the Object Height value and set
the Support Height value equal to Zero .
The minimum height of the objects, including any template, is 32 mm. and the maximum height is 50 mm.