User Guide - Release 3.1 ENG 03/2020
iJet2L Srl
[email protected] | www.iJet2L.com
Company Confidential
Page 9
Setup
Unpacking and Setting up the Printer
Introduction
Carefully unpack and inspect the printer (interior and exterior) for possible damage during shipping.
Note: Be sure to remove any transportation protection from around the print head and inside the
top cover.
To unpack your new printer:
1.
Ensure the printer box is upright and on a level surface.
2.
Carefully extract all the contents of the box and check the contents against those shown in the Shipping
Checklist.
If there is any variation between what has been delivered and what is described in the Shipping
Checklist contact your supplier before proceeding.
3.
Check for any physical damage to the packaging or any of its contents prior to installation.
DO NOT use any damaged components
–
bring them to the attention of your supplier.