ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE :
ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Keep pressing the hooks inward to pull out the Stand-
Base.
Press the hook on the back of the monitor and remove
the Stand-Neck from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks and is secure.
Hold the monitor and install the Stand-Base to the
stand-neck until it clicks and is secure.
Place the Cable Holder.*
* The cable holder cannot be removed after installation.
NOTE
Hook
Hooks
Stand-Base
Stand-Neck
Cable Holder
Summary of Contents for ProLite XU2292HS
Page 2: ...ENGLISH...