REPEATER/CROSS- REPEATER
8
Rev. : 09/25/2012
2. Overview
2.1 Introduction
A KVM Extender is used, to extend the distance between a CPU and its Keyboard / Monitor /
Mouse considerably. The allowed distance is limited by the physics and the make of the
cables.
If the total distance expires the allowed distance, Repeater may double the total allowed
distance.
In some environments, the signal path may be inhomogeneous. This means, a part might be
based on CATx, another part in Multimode. The Cross- Repeater hereby allow to convert
from one medium to another, without laborious regaining the original signals and resending
them.
The Repeater/Cross- Repeater described in this manual are especially designed for the DVXi
KVM Extender Family. Operation with other products is not possible.
2.2 Glossary
The following terms are used in this guide:
CATx
Any Category 5, 5e, 6 or higher cable, solid wires type AWG24.
Fiber
Singlemode or Multimode fiber cable.
Singlemode
9µ Singlemode-fiber cable
Multimode
62,5µ Multimode- or
50µ Multimode-fiber cable
KVM
Keyboard, Video and Mouse.
Console
Keyboard, Mouse and Monitor
Singlehead
An extender system that supports one m Keyboard/Mouse
Dualhead
An extender system that supports two mo Keyboard/Mouse
DVI
Digital Video standard, installed by Digital Display Working Group
(
www.ddwg.org
) R, G, B, CLOCK in a data stream with up to
3x 1,6 Gbit/sec. Signals are TMDS Level.
PSU
The desktop power supply connected to the Repeater/Cross- Repeater.
HID
Human Interface Devices are units, which are used for human access
to the CPU. They are a USB-device class of its own (e.g. Memory
Devices etc.). Besides of keyboard and mouse also touchscreen, light
pen, fingerprint sensor, graphic tablets etc. are HID devices.
Summary of Contents for K471-CM
Page 3: ...EMPTY PAGE Rev 09 25 2012 3 ...
Page 31: ...NOTES ...
