REPEATER/CROSS- REPEATER
10
Rev. : 09/25/2012
2.4 Features
The Repeater/Cross- Repeater offer the following features:
•
Support for DVXi KVM- and Media- Extender (all devices)
•
Support for Draco™ KVM- and Media- Extender (all devices)
•
When installing the Repeater device in the middle of a link, it will allow to double the
total distance. (e.g. CATx up to 2x140m = 280m). Under all other circumstances, the
cable on each side of the Repeater/Cross- Repeater may have the usual maximum
distance (e.g. CATx up to 140m, Multimode 50µ up to 400m, ...).
•
When installing a Cross- Repeater device, the cable on each side of the Repeater/Cross-
Repeater may have the usual maximum distance (e.g. CATx up to 140m, Multimode 50µ
up to 400m, ...).
Attention!
actually DVXi CATx and Fiber devices must not be used assorted. This
means, it’s not allowed, to connect a DVXi CATx Local Unit with a DVXi
Fiber Remote Unit. So actually Cross- Repeater can be used only in pairs.
For Dual- Head devices you need two pieces Repeater (one for each of the
two interconnection cables). A Dual Cross- Repeater CATx to Fiber
(Multimode or Singlemode) is available.
•
The maximum screen resolution as well as the support of other interfaces like USB-HID,
serial, audio, ... only depends on the type of used Extender.
•
Status indicator LEDs on each device.
•
Small footprint chassis.
•
Rack mount options available.
•
Universal switch mode p.s.u. included.
Summary of Contents for K471-CM
Page 3: ...EMPTY PAGE Rev 09 25 2012 3 ...
Page 31: ...NOTES ...
