Operating Instruction
Before filling the air cooler, make sure the unit is unplugged.
INSTRUCTIONS FOR USING AIR COOLER PLUS WITH WATER
1.
Make sure plug on bottom of unit is secure.
2. Open the water inlet by pressing the panel on the lower left side of unit.
3. Fill the water reservoir with cold, clean water; add small Ice Pods if desired.
4. Fill reservoir only to water line indicator to avoid overfilling.
5. After filling, close the water inlet securely. Use care when transporting filled
air cooler.
6. Place the water filled air cooler on a FIRM, FLAT AND LEVEL surface
(To safeguard fine wood finishes, put a protective covering between air
cooler and surface).
7. Plug air cooler into wall outlet and switch on the unit. You must also press
the cool button to activate cooling (Do not plug in the air cooler with wet
hands, an electric shock could occur).
8. The water will last 20 to 22 hours (Check water level periodically).
9.
The small plastic Ice Pods for cooling with water can be placed in the
freezer for one to two hours until frozen hard, then added to the water
reservoir. The colder the water, the cooler the air.
INSTRUCTIONS FOR USING AIR COOLER PLUS WATERLESS COOLING
1. Place the Gel Packs for waterless cooling in the freezer for at least 2 hours.
2. Place frozen Gel Packs in Gel Pack Container, slide into cooling chamber
and PRESS ON.
Storage
1. Clean and dry the cooler thoroughly per cleaning instructions before storing.
2. Be sure all components are dry. Do not leave any water in the air cooler
when storing. Water left in the air cooler may cause deposits or bacterial
growth which could impair the air cooler's performance.
6.
8) Gel Packs: Cooled Gel Packs are placed in Gel Pack Container and then
slid into the Cooling Chamber - used in waterless cooling.
9) Plastic Ice Pods: Use these in water reservoir to keep water cold.
10) Handle of Gel Pack Container placed in Cooling Chamber.
11) Gel packs in Cooling Chamber.
12) Water Reservoir: Water for the cooling function is stored here.
(maximum capacity is 6.5 liters or approximately 1.5 gallons).
13) Rubber Plug and Water Outlet: Remove this plug when draining the
water from the water reservoir.
14) Casters: These wheels make it easy to move from room to room.
15) Water Inlet: The entrance for filling the water reservoir.
16) Copper Casing helps keep Gel Packs cold.
17) Handle: To use in transporting the unit.
18) HEPA Filter: Replaceable filter removes 99.97% of particles in air.
3.
10
8
17
14
15
13
12
16
(2) Gel Packs
(2) Plastic Ice
Pods
11
18
9
