Before Operation
Please read carefully to avoid possible danger.
•
Do not use cooler in the bathroom.
•
Never use wet fingers to connect the power plug.
•
If the Air Cooler PLUS is tipped over during the operation, unplug
the power cord from the wall socket immediately before standing it upright.
•
Do not try to fix the internal parts, it could invalidate the warranty.
•
Do not sit heavy objects on the Air Cooler PLUS.
•
Read and save these instructions.
Important Safety Instructions
When using any electrical appliance, basic safety precautions should be followed.
Prior to using air cooler:
a. Check the power cord for signs of damage (do not use if there are signs of
frayed or exposed wires)
Where to place your air cooler:
a. Place air cooler on a firm, flat level surface (to get maximum use of
machine).
b. Place air cooler away from heat sources (stoves, radiators and heaters can
damage the machine).
c. Place air cooler in an area with the power cord positioned to avoid being
pulled on or tripped over.
d. Do not let children play with the air cooler.
Safety precautions while using air cooler:
a. This product is equipped with polarized alternate current 3-prong plug (Use
only outlets that accept this plug, do not use an adapter).
b. Always unplug and empty air cooler before servicing or cleaning. Never turn
on the power while it is unplugged from a power source.
c. Never tilt or attempt to move air cooler while it is operating (Unplug the air
cooler before any movement).
d. Use the waterless cooling function if relative humidity is very high.
e. When not in use, unplug and empty the air cooler and wrap the power cord
for safety storage.
Caution:
a. To avoid risk of fire, electric shock or other injury, when cleaning or doing
routine maintenance, always disconnect the cooler from the power source
before servicing.
b. Do not operate cooler with a damaged cord or plug. Return for replacement.
c. Do not run power cord under carpeting or cover with throw rugs, runners or
similar coverings. Arrange cord away from traffic where it will not be tripped on.
d. Suitable for use with solid-state speed controls.
4.
Instruction of Control Panel
1. TIMER BUTTON
Once the timer is set, the Air Cooler PLUS runs according to the time you set.
Each press of the Timer button sets the unit to run for the selected number of hours.
The maximum is 8 hours.
2. SPEED BUTTON
Select desired speed at high, medium or low.
3. SWING BUTTON
The louver swings horizontally when activated.
4. COOL BUTTON
Press this button to activate the cooling with water function. Air passes through
the Cooling Chamber and HEPA filter and then through the rolling filter in the water
reservoir. Water must be in the water reservoir for this function to work. Do not use
this when cooling without water and Gel Packs.
5. ON/OFF SWITCH
Press this button to start the unit.
6. REMOTE CONTROL
You can use your remote control to operate the unit, controlling all the above
functions from your chair. The remote is magnetic to attach to the side of the
cooler so you always know where to find it.
POSSIBLE PROBLEMS TO AVOID:
• Press the buttons on the control panel with a finger. Using sharp objects could
damage the unit.
• Clean out any water remaining in the water reservoir if not using the unit
for 3 or more days. Make sure the reservoir is completely dry before
storage. Keep the unit away from direct sunlight.
• Do not sit on or place heavy objects on the unit.
5.
!
!
!
!
!
