IHI Shibaura G-FLOW22 User Manual Download

Page: 49 / 51

Features/Specifications/Models/Accessories/Options

●

Grooming blades are changed to Shiba cutters, more appropriate for removing grass grain. Further, it
offers superior durability.

●

Attachments (grooming, brushes) can be removed/

installed with a single touch.

●

The flow of grass clippings into the basket can be

adjusted.

●

Utilizing the three guide rollers, this mower allows to position

the reel unit supporting point to the center of the blade.
Therefore, it demonstrates the superior performance in following
undulations on the ground and preventing grass from clinging.

●

You can remove the reel unit easily without any tools.

●

An offset moving system is used, similar to the G-EXE

series.

■ Effects of blade position on grass

●

The cutting position is adjusted to “6” when the mower is shipped from the factory.

Summary of Contents for G-FLOW22




















































Search results

Summary of Contents for G-FLOW22

Reviews:

Related manuals for G-FLOW22

Brands by name

Popular brands

IHI Shibaura G-FLOW22, User Manual

Search results

Summary of Contents for G-FLOW22

Reviews:

Related manuals for G-FLOW22

Brands by name

Popular brands