29
Adjustments
6. Place the cutting height gauge against the portion of
the front roller that contacts the ground and the rear
roller, and then turn the height adjustment knob for the
front roller until the neck of the screw in the center of
the gauge is at the same height as the top of the bed-
knife.
●
Turn the height adjustment knob for the front roller clock-
wise to lower the front roller and counterclockwise to raise
the front roller.
7. Adjust the height on the left and right sides. Once the
bedknife is positioned at the correct height, tighten the
height anchor nuts to anchor the height of the front
roller.
8. Loosen the height anchor nuts on the work attachment
height adjustment knobs (left), (right).
9. Place the cutting height gauge against the portion of
the front roller that contacts the ground and the rear
roller, and then turn the height adjustment knob for the
work attachment until the length of the gauge screw
sticking out is the same as the end of the work attach-
ment.
●
Turn the height adjustment knob for the work attachment
clockwise to raise the work attachment and counterclock-
wise to lower the work attachment.
10. Adjust the height on the left and right sides. Once the
work attachment is positioned at the correct height,
tighten the height anchor nuts to anchor the height of
the work attachment.
