Protective Cover
Element
Function
“LED product” connector
Connector for plugging the USB Pen into the special compartment in the LED product
“T1” button
-
Long pressure (about 3 seconds) : “Download” (data transfer from USB Pen to
LED street lamp)
-
-
Press and hold simultaneously with T2: “Upload” (data transfer from LED product to
USB Pen)
“T2” button
-
-
Press and release: “Test” (changes the light intensity emitted by the LED product)
-
- Press and
hold simultaneously with T1: “Upload” (data transfer from LED product to
USB Pen)
“USB” connector
Type B Mini-USB connector for connection to PC
“Link/OK” LED
Green LED:
-
Flashing, if the flash drive is powered but not connected to a PC or Led Driver;
With fixed light once the connection to the PC has been established through either
the LED Street Lamp or SW;
“Data” LED
Yellow LED, flashes when data is sent to the USB Pen or from the Pen to the
PC/LED product
“Error” LED
Red LED lighting up when there is a mistake or the data to be downloaded is not
compatible with the FW of the LED Driver.
If the USB Pen is battery-powered and the battery voltage is not enough, the red LED
will start flashing.
Protective Cover
Covers and protects the “LED product” connector
For any information on software installation and pen profiler operation see the website at the
following link:
