Ignition Co9Z LED Flood IP65 540W RGBW, User Manual

Page: 11 / 44

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
NOTICE!
Possible damage due to moisture
Moisture entering into open connectors (plugs and couplers) of DMX or
power cords can cause short circuits.
Close unused connectors with end caps intended for this purpose
( www.thomann.de ).
The quick lock openings on the housing bottom are used for secure attachment of
the supplied Omega brackets. Here you can connect flight adapters (such as C-
hooks). The safety rope must pass through the notches on the bottom case as shown
in the following figure.
You can install the unit in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved truss.
Always work from a stable platform whenever installing, moving or servicing the
unit. In doing so, the area underneath the unit must be cordoned off.
1 Quick lock openings for Omega brackets
2 Openings for safety cable
Mounting options
Installation
Co9Z LED Flood IP65 540W RGBW
11
LED floodlight