Ignition Co9Z LED Flood IP65 540W RGBW, User Manual

Page: 12 / 44

5 Starting up
Create all connections while the device is off. Use the shortest possible high-quality
cables for all connections. Take care when running the cables to prevent tripping
hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the first DMX device to the input of the
second one, and so on to form a daisy chain. Always ensure that the output of the
last DMX device in the daisy chain is terminated with a resistor (110 Ω,
¼
W).
When you configure a group of devices in master/slave mode, the first unit will con‐
trol the other units. This function is ideal when you want to start a show immediately.
Connect the DMX output of the master device to the DMX input of the first slave
device. Then connect the DMX output of the first slave device to the DMX input of
the second slave device and so on.
Please note that this device must not be connected to a dimmer.
Connections in DMX mode
Connections in master/slave mode
Starting up
12
Co9Z LED Flood IP65 540W RGBW
LED floodlight