Ignition Co9Z LED Flood IP65 540W RGBW, User Manual

Page: 16 / 44

7.2 Main menu
If the display is in standby, unlock it: Successively press [UP] , [DOWN] , [UP] , [DOWN]
and [ENTER] .
Press [MODE] to activate the main menu. Use the buttons [UP] or [DOWN] to select a
submenu. When the display shows the desired submenu, press [ENTER] to open it. To
close the main menu, press [MODE] . The stored values are displayed in white in the
display. Changed values are displayed in red until they are confirmed by [ENTER] .
All previously made settings are retained even when you disconnect the device from
the power grid. To restart with default values, use the function ‘Factory Reset’ .
The following table shows the setting options.
Main menu Menu level 2 Menu level 3 Menu level 4
Meaning
‘DMX Address’ ‘Set DMX address’ 001…512 Setting the DMX address
‘MODE’ ‘DMX Signal Select’ Selection of the DMX transmission type
‘DMX’ DMX via cable
‘Wireless DMX’ DMX via radio transmission
‘DMX Mode’ Selecting a DMX mode
‘DMX 3Ch’ 3-channel DMX mode
‘DMX 4Ch1’ 4-channel DMX mode 1
‘DMX 4Ch2’ 4-channel DMX mode 2
‘DMX 5Ch’ 5-channel DMX mode
‘DMX 15Ch’ 15-channel DMX mode
‘DMX 20Ch’ 20-channel DMX mode
‘DMX 21Ch’ 21-channel DMX mode
‘DMX 37Ch’ 37-channel DMX mode
‘Slave’ ‘Slave’ Operating mode ‘Slave’
‘Auto’ ‘Auto Fading’ 0…255 Automatic Fade effect
‘Auto Jumping’ 0…255 Automatic Jump effect
‘Static’ ‘Dimmer’ 0…255 Setting the overall brightness
‘Strobe’ Strobe effect
0…5 Open strobe
6…10 Closed strobe
11…33 Random Pulse effect with
increasing speed
Operating
16
Co9Z LED Flood IP65 540W RGBW
LED floodlight