6
CLEANING AND MAINTENANCE
Descaling
IMPORTANT: As this kettle is fitted with an immersed element it must be regularly descaled. The
frequency of descaling depends on usage and the hardness of the water in your area.
Excessive amounts of scale can cause the kettle to switch off before reaching boiling point and cause
damage to the element which is not covered by the guarantee.
• Any regular descaling agent may be used, provided the relevant instructions are observed.
• Do not fill the kettle to the upper mark to avoid spillage if the descaling agent causes the water
to foam.
• To clean the kettle thoroughly of any decalcification residues, let it go through several boiling cycles
using clean water with each cycle. Rinse the kettle with clean water afterwards.
Cleaning
• Before cleaning the kettle, ensure it is disconnected from the power supply and has cooled
down completely.
• Do not use abrasives or harsh cleaning solutions.
• Do not immerse the base or the kettle in any liquid. To clean the exterior, use a slightly damp lint
free cloth.
• It is advisable to remove limescale deposits at regular intervals.
MAINS PLUG FUSE REPLACEMENT
Fuse Replacement
The appliance must be earthed. Remove the central fuse cap
and take out the fuse. Replace with a new fuse of the same Amp.
Securely fix the fuse cap back into place.
