5
APPLIANCE OVERVIEW
OPERATING INSTRUCTIONS
Before first use
Before using the kettle for the first time, fill with water to the MAX level, boil and pour away. Repeat this
several times using fresh water each time you boil the kettle.
Using your kettle
• Place the cordless base on a level firm surface.
• Where ever possible fill the kettle through the spout as this will help to reduce the amount of
limescale that builds up on the filter.
• The amount of water can be measured by the level mark on the outside of the kettle. Never fill
the kettle above the MAX level and ensure it is always above the MIN level.
• Only fill the kettle with the amount of water you need as this will save electricity.
• Always make sure that the lid is properly firmly closed.
• Place the kettle on the cordless base making sure it is positioned correctly.
• Plug in and switch on at the wall socket.
• Put the ON / OFF switch to its ‘ON’ position and the switch will illuminate.
• When the water boils the kettle will switch off automatically. The kettle can be switched off manually
by putting the switch to the ‘OFF’ position.
• To re-boil the kettle, switch on again. If the appliance has just switched off you may have to wait a few
minutes before switching back on.
• When the kettle has boiled the water may be poured out through the spout.
• This kettle is fitted with a safety cut-out to protect the kettle from damage in case of inappropriate
use. Should the kettle be accidently operated without water or if all of the water has evaporated, the
safety cut-out will automatically switch off the heating element. In such a case, remove the plug from
the wall socket immediately and refill the kettle. Allow the element to cool for a few minutes and
then start using the kettle as normal.
1. Power base
2. Water gauge
3. Body
4. Spout
5. Lid
6. Handle
7. On/Off Switch
1.
2.
3.
4.
5.
7
6.
