background image

3

IMPORTANT SAFETY INSTRUCTIONS
Read and follow all of the instructions even if you feel you are familiar 
with the product, and find a place to keep this manual handy for future 
reference.

Important:

 

This appliance is intended for use in a domestic 

environment only. Any other use is not recommended by the manufacturer 
and may cause fire, electrical shocks or other injury to user or property. 
When using electrical appliances, basic safety precautions should always be 
followed:
•  Please read all instructions carefully before using the appliance for the 

first time.

•  Before using the appliance, check the voltage indicated on the rating 

label corresponds with the main voltage in your home.

•  When the appliance is turned on for the first time, operate it at 

maximum temperature for at least 2 hours. During this time, make 
sure you are in a well-ventilated area whilst the ‘new smell’ is burnt off. 
This is completely normal and is not a cause for concern.

•  Place the appliance on a flat, stable, heat-resistant surface. Operating 

the product in any other position could cause a hazard.

•  Do not use the appliance if it arrives partially assembled or damaged.
•  In order to prevent overheating, do not cover the appliance.
•  Children aged from 8 years and above can use this appliance if they 

have been given supervision or instruction concerning the use of the 
appliance in a safe way and understand the hazards involved. Cleaning 
and user maintenance shall not be made by children unless they are 
older than 8 years and supervised.

•  Keep the appliance and its cord out of reach of children aged less than 

8 years

•  Children shall not play with the appliance.
•  Persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge can use appliances if they have been given 
supervision or instruction concerning the use of the appliance in a safe 
way and understand the hazards involved.

Caution: 

Some parts of this product can become very hot and cause 

burns. Particular attention has to be given where children and vulnerable 

Summary of Contents for 1G2610





















Reviews: