9
Functions
POWER:
Use this button to cycle between the appliance’s 3 power levels and
standby mode. The power level set is indicated by the lights on the right hand
side of the control panel:
Light 1 + 2 + 3
Full Power (default)
Light 1 + 2
Medium Power
Light 1
Low Power
Note:
If no lights on the right hand side are lit, but the red indicator on the left
hand side illuminates, the appliance is in standby mode.
TEMPERATURE:
When this button is pressed for 1 second, the
desired temperature can be set:
• The LED display will flash the current temperature of the oil.
• Press the and buttons to select the desired temperature (between
5°C – 30°C)
• The appliance will heat the room to the desired temperature.
Note:
The default temperature setting is 24°C
TIMER:
Press and hold this button for 3 seconds to set the timer:
How to use the Timer to switch ON the appliance (H):
• Plug the appliance into a suitable wall socket and then press the On/Off
button once to switch the appliance to standby mode.
• Press the Power button to switch the appliance to ‘On.’
• Set the temperature and power levels as desired.
• Press and hold the Timer button for 3 seconds, release, then press
again for a further 3 seconds; the LED display will show the letter ‘H’.
• Use the and buttons to select the desired turn on time.
Note:
The timer can be set from 0-24 hours in increments of 1 hour.
• The appliance will switch to standby mode and all 3 power lights will flash;
the unit will automatically turn on after the set time.
How to use the Timer to switch OFF the appliance(h):
• Plug the appliance into a suitable wall socket and then press the On/Off
button once to switch the appliance to standby mode.
• Press the Power button to switch the appliance to ‘On.’
• Press and hold the Timer button for 3 seconds; the LED display will
show the letter ‘h’.
• Use the and buttons to select the desired turn off time.
Note:
The timer can be set from 0-24 hours in increments of 1 hour.
