background image

4

people are present.
•  It is normal for the appliance to make ‘cracking’ noises when it is 

heating up and cooling down.

•  Do not use the appliance for anything other than its intended use. This 

appliance is designed for use as a supplementary heat source; it is not 
intended to be the main source of heat.

•  Never leave the appliance unattended whilst in use.
•  Do not pull on the cord to disconnect the plug from the wall socket.
•  Do not use the appliance to dry washing.
•  Do not use the appliance if the power cord or plug is damaged. 
•  Never rest the power cable on the hot fins of the appliance.
•  Always ensure that the appliance is positioned at least 1m away from 

furniture or other objects.

•  The appliance should not be used if it has been dropped or if there are 

visible signs of damage.

•  This appliance is for household indoor use only. Never use it outdoors.
•  Before moving or attempting to clean the appliance, allow it to cool 

down completely.

•  The appliance should not be placed directly under a fixed power 

socket.

•  Do not attempt to repair, disassemble or modify the appliance. There 

are no user-serviceable parts inside.

•  This product contains oil and must be disposed of correctly.
•  Do not dispose with general household waste. Take it to your nearest 

waste management centre for processing.

•  The use of an extension lead is not recommended, as overheating of 

the extension lead may occur during appliance operation.

Caution:

 

In order to avoid a hazard due to inadvertent resetting of the 

thermal cut-out, this appliance must not be supplied through an external 
switching device, such as a timer, or connected to a circuit that is regularly 
switched on and off by the utility.
•  As this is a high power appliance, the plug could get warm during use. 

This is normal and should not reach excessive levels.

•  To avoid an electrical circuit overload, please ensure that no other high 

wattage appliances are used simultaneously on the same circuit. If in 
doubt, please contact a qualified electrician.

Summary of Contents for 1G2610





















Reviews: