34
iGage iG9 User Manual
Once connected and logged in, click on the left bar item ‘
Network Setting
’ then ‘
Network: Mobile
Network Setting
’
Click ON to turn on the cellular modem. Set Auto Start to Yes, set Auto Connect to Yes.
If you are using an iGage Supplied DAC card:
set the APN to ‘dac.com.attz’
If you use a ‘True ATT’ SIM card:
set the APN
to ‘
B
roadband’
(with capital-
‘B’)
. If you use
another type of SIM card enter the appropriate APN for the card.
Set the Dial String to
‘*99#’, leave the
User Name and Password empty. Click Save.
Turn off the GPRS Modem by clicking OFF, wait 10 seconds then turn the GPRS Modem on
again by clicking ON. This resets the network connection with the correct APN active and
forces the network to reinitialize the data connection.
Click on Dial to attempt to connect. After about 30 seconds, the Dialing Status will change
to
‘
Connected
’
after the iG9 is registered on the cellular network.
Alternatively, you can configure the Cellular modem with X-PAD, Field Genius or SurvCE/SurvPC
when setting the iG9 as a network Rover.
