24
iGage iG9 User Manual
Click on the
down
button.
Change the
Sensors mode
to
Tilted Pole (GNSS
receiver)
:
.
Set the
Max error (2m pole)
to the maximum
horizontal offset of a receiver at the top of the
pole from the point on the ground. (A 20° tilt on
a 2-
meter pole is 2.25’ offset.) Tilts that result in
a higher offset will pause measurements.
Finally click
Accept
.
The
SURVEY
or
STAKING
screen will be shown:
A translucent tilt indicator will be displayed on
the map bottom. As the IMU initializes several
prompts are shown. The symbol above requests
that you need to rock the receiver back-and-
forth on a point.
This icon:
requests that you hold the receiver nearly still
and level.
Usually, the status goes back and forth between
rocking and holding still.
