QHA210
11
w
Prompt to change the password appears.
u
Change the password when signing in for the first time.
Password requirements:
•
At least 8 characters
•
Must contain:
– at least one upper case letter
– at least one lower case letter
– at least one number
– at least one special character
There is no visible feedback on the monitor for the input. For example, no ***** is displayed in
the input field. The field on the monitor remains empty despite input.
u
Repeat the password and confirm by clicking on [Ok].
u
After assigning the new password, log in again with new login data.
w
The [Main menu] of the moneo|appliance is displayed.
7.3.1 Adapting the hostname
The default host name of the moneo|appliance is:
moneo-
< serial number of moneo|appliance >
u
Note that the entry is case sensitive.
The host name can be adapted when signing in for the first time or later by following the below
steps.
u
Open the [Main menu].
u
Select [C) Configure the system].
w
[Configuration menu] opens.
u
Select [H) Change the hostname].
w
[Host name change] opens.
w
The current host name is displayed in the field [Specify the new hostname] .
u
Change the host name using the keyboard and select [Ok].
w
The host name is saved and the interface [Host name change] is closed.
u
Select [R) Return to the previous menu] to go back to the previous menu environment.
7.3.2 Adapting the IP address - Ethernet interface 2
u
Open the [Main menu].
u
Select [C) Configure the system].
w
[Configuration menu] opens.
u
Select [N) Configure the network].
w
[Network configuration] opens.
u
Select [I) IT network (ETH 2)].
u
Select [U) Use DHCP].
u
Click on [Enter] to change the entry from [yes] to [no].
u
Select [I) Set the IP address].
