![background image](http://html1.mh-extra.com/html/ifm/pm16-series/pm16-series_operating-instructions-manual_4132637023.webp)
23
UK
8 Operation
After power-on and expiry of the power-on delay time of approx� 0�5 s the unit
is in the RUN mode (= normal operating mode)� It carries out its measurement
and evaluation functions and generates output signals according to the set
parameters�
9 Error correction
The unit has many self-diagnostic options�
It monitors itself automatically during operation�
Warnings and faults are signalled via IO-Link�
If a process value fails, the other process values are still available�
Additional diagnostic functions are available via IO-Link. → IODD interface
description at www�ifm�com�
IO-Link error codes are contained in the IODD
Type Description
Output
behaviour Error correction
Error Unit faulty / malfunction
21�5 mA Replace device�
Error Supply voltage too low
off
Check supply voltage
Error Parameter setting outside the
valid range
21�5 mA Repeat parameter setting�
Error Error in pressure measurement
21�5 mA Check pressure measurement�
Replace device�
Warning Pressure range exceeded
(>= 105 % VMR*)
OU
Check pressure range�
Warning Pressure range not reached
(>= -5 %MAW*)
OU
Check pressure range�
*MEW = final value of the measuring range, **MAW = initial value of the measuring range
In case of a warning the analogue signal is as defined in the parameters [OU]�