7
UK
►
Screw the sensor into the adapter
until it is hand-tight. Do not damage
the sealing chamfers.
►
Clamp sensor and adapter into a
clamping device (D). Tighten the
clamping device only slightly so
that the adapter does not warp. The
sealing chamfers (E) must not be
damaged.
►
Tighten the sensor using a spanner
until you can feel the end stop (cor-
responding to a maximum tighten-
ing torque of 25 Nm / 18 ftlb). Note:
Do not overtighten. This can have
an adverse effect on the sealing.
NOTE: A guarantee for a long-term stable and maintenance-free fitting with no bug
traps in the hygienic sealing of the metal seal (Aseptoflex connection) is only valid
for once-only mounting.
Welding adapter
First weld the adapter, then mount the sensor. Follow the instructions included
with the adapter.