7
UK
The unit is adaptable for various G 1 process fittings� G 1 process adapters to be
ordered separately as accessories�
Mounting
�
�
�
��
�
1
3
2
Screw the unit into the adapter (A) until it is hand-tight (fig� 1)� Do not damage
►
the sealing chamfers�
Clamp sensor and adapter into a clamping device (B); (fig� 2)� Tighten the
►
clamping device only slightly so that the adapter does not warp�
Tighten the sensor using a spanner �
►
Tightening torque: 20 Nm�
Fix the unit + adapter to the process connection by means of a coupling nut, a
►
clamp flange or the like (C); (fig 3)�
NOTE: A guarantee for a long-term stable sealing of the metal seal is only valid for
once-only mounting�
Welding adapter
First weld the adapter, then mount the sensor� Follow the instructions included
►
with the adapter�
