11
UK
Menu explanation
8.2
OU2
Output function for OUT2:
Analogue signal for the current system pressure
•
: 4���20 mA [I] or 20���4 mA
[InEG]�
tCOF
Teaching zero-point calibration�
tASP
Teaching analogue start point for the system pressure: set value at which
4 mA are output (20 mA on [OU2] = [InEG])�
tAEP
Teaching analogue end point for the system pressure: set value at which
20 mA are output (4 mA on [OU2] = [InEG])�
EF
Extended functions / Opening menu level 2�
Uni Standard unit of measurement for the system pressure�
SELd
Display mode:
Pressure in the unit set in [Uni]�
•
Pressure in % of the set scaling of the analogue output�
•
ASP Analogue start point for the system pressure: measured value at which 4 mA
are output (20 mA on [OU2] = [InEG])�
AEP Analogue end point for the system pressure: measured value at which 20 mA
are output (4 mA on [OU2] = [InEG])�
HI Maximum value memory for the system pressure�
LO Minimum value memory for the system pressure�
COF Zero point calibration�
dAA Damping for the analogue output�
diS Update rate and orientation of the display�
rES Restore the factory setting�
