12
Parameter setting
9
During the parameter setting process the unit remains in the operating mode�
It continues its monitoring function with the existing parameters until parameter
setting has been terminated�
Parameter setting general
9.1
Each parameter setting requires 3 steps:
1
Selecting parameter
Press [Mode/Enter] until the reque-
►
sted parameter is displayed�
���������� ���
2
Setting the parameter value
Press [Set] and keep the buton
►
pressed�
Current setting value of the parame-
>
ter bit flashes for 5 s�
After 5 s: Setting value is changed:
>
incremental by pressing briefly or
scrolling by holding pressed�
���������� ���
The numerical values are incremented continuously� If the value is to be reduced: Let
the display move to the maximum setting value� Then the cycle starts again at the
minimum setting value�
3
Acknowledge parameter value
Press [Mode/Enter] briefly�
►
The parameter is displayed again�
>
The new setting value is stored�
���������� ���
Set more parameters
Start again with step 1�
►
Finishing parameter setting
Press [Mode/Enter] several times until the current measured value is displayed or wait
►
for 15 s�
The unit returns to the operating mode�
>
