![background image](http://html.mh-extra.com/html/ifm/lr8010/lr8010_operating-instructions-manual_620729017.webp)
17
UK
6.4 Installation of the unit with coaxial probe in the tank
There must be a fitting process connection (G¾) in the tank�
►
Seal the process connection: slide the supplied seal onto the thread of the
coaxial pipe�
►
Screw the unit with the coaxial pipe into the tank and tighten it�
Secure the screw connection between the coaxial pipe and the tank! For
this purpose, the manufacturer recommends Loctite 270�
Substances such as glue or screw retaining compounds might migrate into
the medium� Therefore, make sure that they are harmless!
6.5 Alignment of the sensor housing
After installation, the sensor housing can be aligned:
The sensor housing can be rotated without restriction� Even if rotated
several times there is no risk of damage to the unit�