![background image](http://html.mh-extra.com/html/ifm/lr8010/lr8010_operating-instructions-manual_620729012.webp)
12
5.2.7 IO-Link function
This unit has an IO-Link communication interface which enables direct access to
process and diagnostic data�
In addition it is possible to set the parameters of the unit while it is in operation�
Operation of the unit via an IO-Link interface requires an IO-Link capable module
(IO-Link master)�
With a PC, suitable IO-Link software and an IO-Link adapter cable, communication
is possible while the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
5.3 Password protection against inadvertent manipulation
As an option, the sensor can be protected by a password against inadvertent
manipulation and unauthorised changes�
Password on delivery:
Not activated!
For activation/deactivation
6 Installation
6.1 Installation location / environment
The unit must be installed from above!
CAUTION
The surface of the unit may get hot if the switching outputs are
overloaded� However, only overload will cause hot surfaces�
> Risk of burns
►
Cover housing to prevent unintentional contact�