Electronic level sensor
LR3009
23
FOU2
Response of OUT2 in case of a fault.
dFo
Delay time for the outputs to pass into the safe state.
ASP2
Analogue start point for level:
Measured value at which the analogue start value is provided. The analogue start value is set with parame-
ter [OU2].
AEP2
Analogue end point for level:
Measured value at which the analogue end value is provided. The analogue end value is set with parameter
[OU2].
P-n
Output polarity for the switching output (NPN or PNP).
SELd
Type of indication.
LEnG
Probe length.
MEdI
Medium to be detected.
Prob
Type of probe used (single probe or coaxial probe).
The menu item is only active if MEdI = HIGH.