![background image](http://html.mh-extra.com/html/ifm/io-link-master-profinet-al1102/io-link-master-profinet-al1102_operating-instructions-manual_3919495021.webp)
IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
21
8
Set-up
Content
Read device and diagnostic information ................................................................................................22
52476
When the supply voltage has been switched on, the AL1102 starts with the factory settings. The
display elements signal the current operating status (
→
Operating and display elements
(
To enable parameter setting of the AL1102, the fieldbusinterface of the network environment must be
configured correspondingly.
► Configure the fieldbus interface (ports X21 / X22) (→
Fieldbus: Set PROFINET interface
(
) or
→
Integrate the IO-Link master in the project
(
>
The fieldbus interface has valid IP settings.
>
The user can set the parameters of the AL1102.
Further steps:
Optional: Update the firmware of the AL1102 (
→
Firmware update
(
Set the parameters of the AL1102 (
→
Configuration
(