8. Maintenance, repair and disposal
The pcb controllers have no components to be maintained by the user. Only
the manufacturer is allowed to repair the modules.
Disposal must be according to the national environmental regulations.
9. Technical data
PAGE
12
PCB CONTROLLER
CS0015
open pcb
162 x 126 x 75 mm (WxHxD)
on TS32 and TS35 mounting rail
0...+40 °C
IP00 (open pcb controller), to EN60529
degree of soiling 2 according to EN61010
directive 95/54/EC and EN 61000-6-4: 2001
directive 95/54/EC and EN 61000-6-2: 2001
24 V DC (-15%...+25%)
≤
150 mA (without external load)
watchdog, 200 ms
CMOS microprocessor C167C/20 MHz
SRAM 2 x 128 kBytes
EEPROM 1 kBytes
Program memory 192 kBytes
connections possible CAN1, CAN2, CANopen protocol,
transmission rate to CANopen specification DS301
50 Kbits/s...1 Mbits/s
signals: TxD, RxD, GND
transmission rate 9.6 Kbaud
S1: LOCK, UNLOCK
S2: rotary switch to be configured freely
with 16 positions 0...F
S3, S4, S5
PWR LED (green) lights
if supply voltage is ok
STAT LEDs green and red
Housing
Housing dimension
Mounting
Operating temperature
Protection rating
EMV
Interference immunity
Interference emission
Supply voltage
Power consumtion
Unit monitoring
Processor
Memory volatile
non volatile
Program memory
CAN interface
Baud rate
RS232 interface
Operating elements
Switch
Rotary coding switch
Buttons
Indication
Power LED
Status LEDs
