ENGLISH
10. Declaration of conformity
The CE-marking is applied on the basis of the EMC guideline EMC
89/336/EEC implemented in the standards EN 61000-6-4 (2001) and EN
61000-6-2 (2001) as well as the low voltage guideline NS73/23/EEC imple-
mented in the standard EN 61010-1 (2001).
PAGE
13
PCB CONTROLLER
CS0015
Parameter LCD display
Input IN0...IN15
Number of inputs
Display
Input voltage
Input current
Input level
Output level
Input filter
Output OUT0...OUT15
Number of outputs
Type of output
Display
Switching voltage
Switching current
Inductive switch-off power
individual pulse
Protection
Connections
LCD display 5 x 7 segments and 3 x 14 segments,
6 mm character height, without background illumination
16; common reference point (GND)
LED yellow
24 V DC nominal
100 % simultaneity factor: max. input voltage = 24
50 % simultaneity factor: max. input voltage = 30
typ. 10 mA
+15...+30 V DC
0...+5,5 V DC (or input current < 1,5mA)
IN0...IN3: max. 500 Hz; specified for pulse-pause ratio 1:1
IN4...IN15: max. 25 Hz; specified for pulse-pause ratio 1:1
16 (2x8); common supply voltage (+24 V DC)
for 8 outputs each
transistor, positive switching
LED red
DC; min.: 12 V, nominal voltage: 24 V, max.: 34 V
1.1 A per output
(If the exact specifications are considered,
higher currents can be switched)
0.3 J per output
(If the exact specifications are considered,
higher power can be switched)
OUT0...OUT15:
electronic short-circuit protection per channel > 6 A
voltage supply and inputs/outputs:
Phoenix Contact COMBICON RM5,08
CAN/serial interface:
Phoenix Contact COMBICON Mini RM3,81
