![background image](http://html1.mh-extra.com/html/ifm/e30503/e30503_operating-instructions-manual_3930373007.webp)
7
UK
► If possible: weld the inside.
►
Let the adapter and the welding aid cool down.
►
Remove the welding aid.
►
Remove deposits from the adapter thread.
►
Screw in the sensor by hand in order to check for dimensional accuracy and
functionality of the thread. If the tightening torque is too high, do not use any
tool, but check the thread and replace the adapter, if necessary.
5 Mount sensor
A lubricating paste is required to install the sensor. It must be suitable and
approved for the given application and compatible with the elastomers
used (e.g. seal).
►
Ensure cleanliness of the sealing areas.
► Use lubricating paste (A) sparingly
and apply to threaded parts and
the sealing ring.
A