![background image](http://html1.mh-extra.com/html/ifm/e30503/e30503_operating-instructions-manual_3930373008.webp)
8
► Tighten firmly. Recommended tightening torque: 25...35 Nm.
Depends on the lubrication, the seal and the pressure load!
Too much torque may impair the seal and lead to the sensor being
damaged.
If the sealing area is damaged: replace the adapter.
6 Set-up
►
Before set-up check the tank or pipe for ingress resistance.
►
Perform a pressure test with screwed-in dummy plug or sensor.
► Set-up of the sensor: → Operating instructions of the sensor.
More information at www.ifm.com