![background image](http://html1.mh-extra.com/html/ifm/e30503/e30503_operating-instructions-manual_3930373005.webp)
5
UK
4.1 Welding operation with welding aid
The basic notes and guidelines must be adhered to
(→ 3.1)
.
• The welding method must be suitable for the welding task and the
power of the welding equipment must be adapted to the material
thickness.
• The adapter must not warp.
• During welding, avoid overheating of the adapter and observe sufficient
cooling phases.
• The sealing area of the adapter must not be damaged by weld spatter
or similar. The sealing area should be sufficiently protected before
starting the welding process
(→ 3.1)
.
►
Bore a hole in the pipe or tank wall with the outside diameter of the adapter.
►
Basic notes
(→ 3.1)
.
►
Insert welding aid E30508 (for heat conduction and protection of the sealing
edge) and tighten by hand.
Welding adapter (1) with mounted welding aid (2):
1
2